The analog EV3 Touch Sensor is a simple but exceptionally precise tool that detects when its front button is pressed or released and is able to count single and multiple presses.

This pack includes elements from the EV3 Expansion Set, the NXT Base Set, and the NXT Resource Set.

Add a rainbow of colors to SPIKE™ models with this LEGO® Technic™ 3x3 Color Light Matrix.

Keep your LEGO® Education SPIKE™ Prime Set (45678) in perfect working order with the LE Replacement Pack Prime. With over 100 LEGO Technic™ and System elements, this replacement pack means you won’t waste precious classroom time searching for missing pieces. A collection of replacement LEGO® Technic™ and System elements for the LEGO Education SPIKE™ Prime Set (45678).

The LEGO Technic Small Hub Battery is a rechargeable lithium-ion battery for use with the Technic Small Hub (45609).

Attach the Tilt Sensor to the WeDo 2.0 Smarthub and it can detect seven different types of orientation: Tilt This Way, Tilt That Way, Tilt Up, Tilt Down, No Tilt, Any Tilt, and Shake. No setup is required; simply connect the Tilt Sensor and it will be identified automatically by the WeDo 2.0 Software.

Designed for use with the LEGO® Education WeDo Construction Set and the LEGO USB Hub, the tilt sensor can detect six different positions and is automatically detected by the WeDo Software.

Detect 6 colors and objects within 5 to 10 cm range with this robot toy accessory for kids.

LEGO Technic Color Sensor compatible with SPIKE Prime and SPIKE Essential sets.

LEGO Technic Distance Sensor compatible with SPIKE Prime and SPIKE Essential sets.

LEGO Technic Large Hub Battery

The LEGO® Technic™ Large Hub is an advanced yet simple-to-use brick-shaped device featuring 6 input/output ports for connecting a variety of sensors and motors, a customizable 5x5 light matrix, Bluetooth connectivity, speaker, 6-axis gyro, rechargeable lithium-ion battery and a micro USB port for connectivity with compatible computers and tablets. The Large Hub can also be built together...

Connect it then flip the switch to power all of your creations!

littleBits Hardware Development Kit (HDK) is the quickest way to get started developing your own module for the bitLab. The two proto modules allow you to connect to PCBs and breadboards, while the perf module allows you to build a small circuit right on the module. When you're ready to design your own PCB, you can use the included gray bitSnap connectors to attach to the board. We've also...

Every circuit starts with power. It uses a 9 volt battery to provide the electricity that makes your Bits spin buzz blink and shine. The power Bit converts the 9 volts of electricity in the battery to the 5 volts that littleBits circuits run on. The power Bit also sends a signal through your circuit. Controlling this signal with inputs is how you control your circuit.

littleBits RVR Topper

This 2.4G Wireless Serial by Makeblock is designed for mBots to be used in classroom or workshop when many people use wireless communication simultaneously.

Specifications： PHASE : 2PHASE STEP ANGLE : 1.8+-5%°/STEP RATED VOLTAGE : 12V CURRENT : 1.7A/PHASE RESISRANCE : 1.5+-10%/PHASE INDUCRANCE : 2.8+-20%mH/PHASE HOLDING TORQUE : 40N.cm Min DETENT TORQUE : 2.2N.cm Max INSULATION CLASS : B LEAD STYLE : AWG26 UL1007 ROTOR TORQUE : 54G.cm2

Fitted with 6 batteries Features: •6xAA Battery Holder with 20cm lead. •Perfect for Arduino. •Compatible to Makeblock Base Bracket.

Makeblock 6P6C RJ25 cable 35 cm

RJ25 cable is compatibled with Makeblock electronic modules, length 20cm. Features: • Compatible with Makeblock electronic modules. • Sold in pack of 4.

"9g Micro Servo Pack from Makeblock is a servo pack for beginners who like to make stuff move , it contains a 9g servo, a servo hub, a servo bracket and hardwares. The 9g Micro Servo can rotate approximately 180 degrees, it works like standard servos but of course not as strong as a standard servo. With the servo hub and servo bracket, it may be convenient to connect the servo with...

Makeblock Base Bracket is a kind of multi-purpose bracket which can use for Arduino, Meduino, and even Raspberry Pi.

This Bluetooth module is designed specially for individual users or family to play fun.

The soil moisture sensor can detect the level of moisture in the soil.

The IR controller is designed to wirelessly control robots and other mechanical device. Working with many common IR receiver, this IR controller provides you a simple and easy way to control your devices without touching it! (Picture for reference only. please go through part list before purchasing.)

Makeblock mBot lisatarvikud

Makeblock mBot liitiumaku

This Me LED Matrix 8 x 16 from Makeblock is frequently-used together with mBot to color your experience of playing with the robot.

Smart World add-on to create innovative designs with mBot2 robot and make a better world!