TTS Pro-Bot Amusement Park Mat

Experience the thrills and spills of a rally with this exciting mat (125 x 125 cm)

125 x 125 cm

TTS Pro-Bot Great Britain and Ireland Mat

Universal camera mount made from a durable plastic with a metal screw thread. Fix any camera to your floor robot with a 10mm diameter hole such as InO-Bot and Pro-Bot®.

Transform your Robot Sensor into a market stall or a shop with this pack of 10 sensor fronts. Designed to make your programming challenge more interactive, these fronts are ideal to be used alongside your range of Bee-Bot/Blue-Bot Mats. Robot Sensor not included.

Use this Robot Sensor to add interactivity and engagement to your programming challenges.

A unique and extremely fun way to program TTS Blue-Bot or Rugged Robot!

The TacTile Extension Pack introduces extra functionality to the standard pack including 45° turns and repeats. Using these, children can program Blue-Bot® to explore geometry and also create efficient algorithms. Product Content: 45° Left x 4 45° Right x 4 Repeat start x 3 2x Repeat x 2 2x Repeat x 1 4x Repeat x 2 6x Repeat x 2 8x Repeat x 2 Repeat end x 3 Pause x 2

For Dot and Dash robot competition...

Make your Dash&Dot Robot even more versatile with these Building Bricks Extensions from Wonder Workshop. Especially designed to work with LEGO bricks. Technics. Mindstorms kits and Hero Factory. each pack comes with 4 connectors. Use with Dash&Dot robots from Wonder Workshop.Features. Build Brick Extensions for Dash&Dot Robots

Vatman paper mat laminated on both sides in the size of 83 * 58 cm.

EV3 Flexi-Cables

Do you need to connect several EV3 sensors to your robot at once? Not enough Sensor ports?

This NiMH battery with connector is designed to be combined with the Energy Display (9668). When combined, the two elements form the LEGO® Energy Meter. Storage capacity: 150 mAh.

The analog EV3 Touch Sensor is a simple but exceptionally precise tool that detects when its front button is pressed or released and is able to count single and multiple presses.

Attach the Tilt Sensor to the WeDo 2.0 Smarthub and it can detect seven different types of orientation: Tilt This Way, Tilt That Way, Tilt Up, Tilt Down, No Tilt, Any Tilt, and Shake. No setup is required; simply connect the Tilt Sensor and it will be identified automatically by the WeDo 2.0 Software.

Every circuit starts with power. It uses a 9 volt battery to provide the electricity that makes your Bits spin buzz blink and shine. The power Bit converts the 9 volts of electricity in the battery to the 5 volts that littleBits circuits run on. The power Bit also sends a signal through your circuit. Controlling this signal with inputs is how you control your circuit.

RJ25 cable is compatibled with Makeblock electronic modules, length 20cm. Features: • Compatible with Makeblock electronic modules. • Sold in pack of 4.

The IR controller is designed to wirelessly control robots and other mechanical device. Working with many common IR receiver, this IR controller provides you a simple and easy way to control your devices without touching it! (Picture for reference only. please go through part list before purchasing.)

Makeblock mBot lisatarvikud

mCore case specially was designed for mBot, and compatible with Lego.

mCore is an easy-to-use main control board specially designed for mBot. Based on Arduino Uno,

Contains 6 Neuron Boards and 36 friction pin connectors.

Contains four colors of EL Wire: blue, pink, purple and white. Requires the EL Wire Driver block.

Contains four colors of EL Wire: blue, pink, purple and white. Requires the EL Wire Driver block.

The Gyro Sensor adds motion and angle detection to your creation.

The LED Strip Driver powers the LED Strip.

The RGB LED can emit diverse colors of light. Change the color or brightness of the RGB LED via the Makeblock Neuron app or through mblock.

"The Robot Gripper from Makeblock is an add-on for your mBot or mBot Ranger for getting a grip on bigger objects than the mini-gripper can. The gripper is made from lightweight PVC and powered by an N20 screw motor which is protected by a thermal overload fuse. Supplied as a fully assembled unit. The Me Dual DC Motor Driver adaptor is required to connect the gripper to the main board...